1949 B1B Wiper Linkage Bushing

[squirebill]

I need a source for the wiper linkage bushings that attach the wiper links to the pivot bar on the vacuum wiper motor.  My manual gives me code number23-67-89 which then calls out part number 1239 371.  Any help would be appreciated.  If unavailable, any ideas how  to fabricate a replacement part  would also be helpful.

[Tooljunkie]

I used little grommets. Had to modify somehow.think i widened the groove in grommet. Dont lose the little clips. 

[9 foot box]

   I used 51A-17562 grommets. If your wiper motor has hex brass connections, make sure that they are free to rotate. 

[squirebill]

Thank you Gents....ordered a 180 piece grommet kit that includes 25 grommets the size of the 51A-17562 grommet.  Regards.

[squirebill]

As per your suggestions, I received the box of rubber grommets I ordered about a week ago.  Installed them with a little silicone spray for lubricant.  All went well and wipers now function.  Ordered wiper arms and blades from Rockauto.  All is good .  Again, thanks for your suggestions. Regards