Los_Control Posted May 16, 2020 Report Share Posted May 16, 2020 (edited) I can use some thoughts on this issue I created. I removed this screw and probably should not have. Now with the screw installed I no longer have reverse or 1rst gear. When I lift up and shift to reverse, linkage feels normal but I am in 2nd gear, Lift up and shift to 1rst and I get 3rd gear. Shifting was fine before I removed the one screw .... I assume there must be a procedure to follow. The shop manual I have does not cover linkage, I have a motors manual coming from ebay but wont be here til next week. Hoping it will cover it. While searching the internet just finding instructions for adjustment. Today I wanted to back it up into the driveway and run a lot of water through it to flush it out. Really disappointed in how much rust & sediment sitting in the head after flushing it out last year and then just draining the water out. Edited May 16, 2020 by Los_Control Quote Link to comment Share on other sites More sharing options...
Los_Control Posted May 16, 2020 Author Report Share Posted May 16, 2020 I dunno, I decided to reach down and just shift it manually for now. To do what I needed. And now all gears are working as should. I guess one linkage got moved or some thing? Quote Link to comment Share on other sites More sharing options...
JBNeal Posted May 16, 2020 Report Share Posted May 16, 2020 additional information - Column Shifter Adjustments 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.