What’s your cabin to bed gap?

[Radarsonwheels]

Howdy folks

 

I’m fitting my bed and cab to my chassis and I would like to know how much space you have between the front of the bed and the back of your cab. Especially on a C-series but I wouldn’t mind seeing how the B truck did it. 

 

On my truck the bed front used to be bowed and smashed way forward in  from it’s hard life as a working truck. I pounded it  much flatter but now the convex bubble of the back of the cab hits first in the middle leaving a larger gap at the sides. 

 

Would anybody be willing to take a picture of their cab/bed gap from the side? 

 

Thanks!

Radar

[Todd B]

Wouldn’t the Runningboard length determine that

[pflaming]

My 52 truck gap: starts the width of a 2X4 at the corner, then narrows to a very tight fit for a 1X4. I would suspect the curvature of the cabs could vary. 

[Radarsonwheels]

Thanks Pflaming!!

Todd B it would but I sectioned my longbed 12” in the front and the boards have to shrink too- I’m running a first gen dakota frame that I sectioned to 102.5” wheelbase.

[FlashBuddy]

A picture is worth a 1000 words.