bergy Posted June 24, 2018 Report Share Posted June 24, 2018 Hi everyone ,workin on my b4:276desota hemi.A500 trans.Anyone adapt any modern trans to put. The emer brake on the trans tail shaft Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted June 24, 2018 Report Share Posted June 24, 2018 I find it interesting you going with newer engine and later modern A500 and not up-grading the rear gearing, especially upgrading the rear brakes.....placing a brake setup on the end of the A500 may be quite the task, have you instead looked at the e-brake for the input to the third member? All in all for cost and simplicity and with respect to even easier future maintenance, I would suggest a modern rear axle. The e-brake then would be a simple cable connecting... 1 Quote Link to comment Share on other sites More sharing options...
bergy Posted June 30, 2018 Author Report Share Posted June 30, 2018 Thank you for. Your response . I’ve been posting on this awhile and have stated in previous posts that I had changed to a 99 Cherokee 3:55 rear . I like the third member e brake idea. Quote Link to comment Share on other sites More sharing options...
kencombs Posted June 30, 2018 Report Share Posted June 30, 2018 Since you already have a later rear end, why not just connect the parking brake mechanism contained in it? Cable connection has got to be easier than engineering a whole new system. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.