seanpt105 Posted March 22, 2018 Report Posted March 22, 2018 just got all new door seals and gaskets for my pt105, what have you guys done to install the window track mine has a tab on the rear channel that holds the end in place and it fits tight all the way up to the first curve on the rearward side the front corner had 2 screws in it and the track fits looser i put the screws in but the top sags. do you use weatherstrip adhesive dbl sided tape or more small screws? also on the cowl seal same question adhesive or tape? the kit i got from dcm and it all seems very well made i also got a windshield and frame and it is awesome no more rusted warped and bent leaky windshield. Quote
Young Ed Posted March 22, 2018 Report Posted March 22, 2018 The U shaped stuff inside the door is held in with clips and a tab at the bottom of the door. The clips are also U shaped and then have a tab on top. At the same time as you slide it towards the bottom the clips will then go into a hole in the door. Quote
seanpt105 Posted March 26, 2018 Author Report Posted March 26, 2018 just pulled other door apart and saw the clips youre talking about im missing a bunch have to see if i can get new ones. also missing the track inside the door thats spot welded in im assuming thats an obsolete item. Quote
Plymouthy Adams Posted March 26, 2018 Report Posted March 26, 2018 (edited) I know top clips and locking tabs available through Restoration Specialties for the cars, you may want to check their online catalog for truck application or call them on the phone. Edited March 26, 2018 by Plymouthy Adams Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.