Cab glass

[bergy]

1953 dodge truck,how do I get the glass out of  vent windows,is there cement on these. ,and the glass out of the side widow metal surround.thanks in advance 

[ggdad1951]

I used a little heat and a razor knife, and lots of patience and time

[Brent B3B]

I used thinner and a razor knife (and that patience thing )

[Merle Coggins]

They are held in with Setting Tape. I used a little heat to soften the rubber and gently pulled the metal frame off of the glass. Installation is a bit tougher. The side window wasn't bad... just lube up the new Setting Tape with soapy water and slip the glass into place, and hold it in place until everything dries out. On the vent windows I fought with them until I got ticked off, then had my glass guys set them into the frames.

Merle

[bergy]

 Thanks bro I'll give it a try appreciate all the good information I have a good day 

[bergy]

I tried to heat it up real hot on the vent windows to try to get the glass out I got a real high and put it in a vice and I still couldn't pull the glass out. I don't want to have to bust the glass out. Maybe I'll try to center trick thanks

[ggdad1951]

2 hours ago, bergy said:

I tried to heat it up real hot on the vent windows to try to get the glass out I got a real high and put it in a vice and I still couldn't pull the glass out. I don't want to have to bust the glass out. Maybe I'll try to center trick thanks

I used a razor knife to help get t out.  Maybe try a local glass guy for some help to not distort the frames.

[bergy]

Hello there

just wondering if you sent my   heater yet?

[ggdad1951]

6 hours ago, bergy said:

Hello there

just wondering if you sent my   heater yet?

yep, I think it should show up today.