WatchingWolf Posted March 26, 2009 Report Share Posted March 26, 2009 1950 D33 (Dodge Wayfarer) Was missing transmission when purchased. I have the fluid coupling, clutch, plate, throwout, fork and upper bell housing. I still need the lower bell housing. I purchased a 1948 Dodge trans of unknown origin and found it to be about 7 inches to long. Can anyone provide me with he measurements for A&B as noted in the attached diagram for the correct 1950 D33 transmission. Both Jefferson and Iola are comming up here in Wisconsin. Thanks, Wolf Quote Link to comment Share on other sites More sharing options...
Young Ed Posted March 26, 2009 Report Share Posted March 26, 2009 Did the wayfarer use the short 3spd? Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted March 26, 2009 Report Share Posted March 26, 2009 Did the wayfarer use the short 3spd? Yes---Regular shorty Plym/wagon trans with long fluid drive input shaft.I don't have measurements. Bob Quote Link to comment Share on other sites More sharing options...
Young Ed Posted March 26, 2009 Report Share Posted March 26, 2009 I think I know where there is a shortly ply tranny but you'd have to convert to fluid drive input Quote Link to comment Share on other sites More sharing options...
they_call_me_tred Posted March 27, 2009 Report Share Posted March 27, 2009 i e-mailed you pictures of the bottom cover i have, did you ever get them? also, give me a couple hours and i'll get those measurements for you. tred. Quote Link to comment Share on other sites More sharing options...
they_call_me_tred Posted March 27, 2009 Report Share Posted March 27, 2009 A = 12-3/16" B = 21" dead on Quote Link to comment Share on other sites More sharing options...
WatchingWolf Posted March 28, 2009 Author Report Share Posted March 28, 2009 i e-mailed you pictures of the bottom cover i have, did you ever get them?also, give me a couple hours and i'll get those measurements for you. tred. Not sure, I have see a lot of bottom covers lately. Haven't found one yet, send photos and price to Watchingwolf@msn.com. thanks Wolf Quote Link to comment Share on other sites More sharing options...
PatS.... Posted March 31, 2009 Report Share Posted March 31, 2009 Here's the bottom cover for my 1949 Chrysler Fluid Drive/3 speed standard. I have an extra if you need one still, just pay the shipping. Quote Link to comment Share on other sites More sharing options...
WatchingWolf Posted April 2, 2009 Author Report Share Posted April 2, 2009 It appears that a fluid drive input shaft is 11 5/8" +/- Plymouth dry clutch is somewhere around 8 1/2" +/- This is the dimension you should get if you subtract A from B in my original post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.