Brakes: What the?...here we go again!

[james49ply]

I bought mine from NAPA, looked like new ones, had no problems, they matched perfectly, even had the same casting #'s

[Robert Horne]

I just picked up 3 new flex brake hoses at Napa. A real big disappointment:( with Napa. I checked one hose at the store, a little short, 3/4 inch, but will work, hose dated 2011. The other 2 hoses were about 1 inch short, different manufacture dates, 2010, and 2007. There is alot of Spanish writing on the boxes, I wonder where they came from.

[desoto1939]

I just picked up 3 new flex brake hoses at Napa. A real big disappointment:( with Napa. I checked one hose at the store, a little short, 3/4 inch, but will work, hose dated 2011. The other 2 hoses were about 1 inch short, different manufacture dates, 2010, and 2007. There is alot of Spanish writing on the boxes, I wonder where they came from.

Bob; I just picked up an old EIS brake catalog that goes from 1935-1956.

Let me know what car you are looking to get hoses and I will supplyy you with the correct hoes number an length can also refernece agains wagner.

i willbe scanning this catalog to CD, Covers Master Cyl, whell cyl and all internal parts hoses a great book to have in the reference library.

These are real hard books to find. Also alot of great pictures of the master cyl and wheel cyl,etc

Rich Hartung

desoto1939@aol.com

[TodFitch]

I just picked up 3 new flex brake hoses at Napa. A real big disappointment:( with Napa. I checked one hose at the store, a little short, 3/4 inch, but will work, hose dated 2011. The other 2 hoses were about 1 inch short, different manufacture dates, 2010, and 2007. There is alot of Spanish writing on the boxes, I wonder where they came from.

What NAPA number(s) did you get? My references indicate:

P15 rear hose part 1119402 should use NAPA UP 10304 with a length of 17.125".

P15 front hoses part 1137710 should use NAPA UP 10595 with a length of 11.5"

If that is wrong I'd like to correct my information. Since I don't have a P15 myself I would like it for someone who does have one verify one way or the other.

[TodFitch]

Bob; I just picked up an old EIS brake catalog that goes from 1935-1956.

Let me know what car you are looking to get hoses and I will supplyy you with the correct hoes number an length can also refernece agains wagner.

i willbe scanning this catalog to CD, Covers Master Cyl, whell cyl and all internal parts hoses a great book to have in the reference library.

These are real hard books to find. Also alot of great pictures of the master cyl and wheel cyl,etc

Rich Hartung

desoto1939@aol.com

Sure would like cross reference numbers for the following Chrysler number 635792 which was used for both front and rear hoses for P1 through P6 Plymouths.

Actually, I'd like cross references for any brake parts I'm missing on my web site. And corrections for those mistakes that I've undoubtedly made. http://www.ply33.com/Parts/group5