tinlizzy Posted December 21, 2008 Report Share Posted December 21, 2008 I've noticed several mentions of dual intakes, dual exhaust manifolds as well as finned heads once in a while. What about cams for the 6, does anyone carry these? What about a 4 barrel intake instead of dual singles? Just wondering Quote Link to comment Share on other sites More sharing options...
daddyo23 Posted December 21, 2008 Report Share Posted December 21, 2008 I couldn't find a company that makes cams. I had a shop grind mine to the specs I got from another guy who was real happy with it. I'm going to be running dual Carter-Weber 2-barrels. Got a split exhaust, having the head cover and deck milled .050. Should do all right. Langdons has just about everything you need. Wayne P. Quote Link to comment Share on other sites More sharing options...
KustumCranbrook Posted February 7, 2009 Report Share Posted February 7, 2009 I just picked up a few goodies from Stovebolt Engine company. Even though they're site looks like they deal with only Chevy...They have speed parts for flatheads and slant mills. I got an Offy duel intake with adapterplates to use 2x2 Carter/Webers, with the linkages, Knock-off Fenton style Headers. Great price for all and the guy I dealt with was not only very nice, He was very helpful and a true fountain of knowledge. Ask for Tom. Kustumcranbrook. Quote Link to comment Share on other sites More sharing options...
msawdey44 Posted August 12, 2009 Report Share Posted August 12, 2009 A couple of other sources: Rusty Hope (www.rustyhope.com) and Vintage Speed (www.vintagespeed.com). Rusty Hope is specific to Mopar flatheads. Vintage Speed sometimes has items that may be of interest, sometimes not. I had a split manifold made by Mike Yoder at Kansas Kustoms, but I think he may have sold his process to someone else (Stovebolt perhaps?)--it is a very nice piece of work. Stuff shows up on eBay from time to time (Fenton headers, Offenhauser intakes) but usually goes for much more than it's worth. Quote Link to comment Share on other sites More sharing options...
Andydodge Posted August 12, 2009 Report Share Posted August 12, 2009 Earl Edgerton in California does finned heads to suit 23 & 25" mopar engines, he also grinds cams........I have one of his heads, am also going to run an Offy twin carb intake, a pair of Oz Stromberg single barrel carbies, have had the exhaust manifolds split---has to use a front and rear dump manifold and use the front and rear of each as I am in Oz and the RHD steering box upsets everything.........lol.....andyd Quote Link to comment Share on other sites More sharing options...
greg g Posted August 13, 2009 Report Share Posted August 13, 2009 summit has offenhauser dual intake for mopar flathead 6. you need to call as they are not in the catalog. Quote Link to comment Share on other sites More sharing options...
55 Fargo Posted August 17, 2009 Report Share Posted August 17, 2009 Gents, have asked this ?, on a few other related threads. What HP can one expect from a modding these flat head 6s. Here is what I hope to do with my sezied 251, rebuild,shave head .060, have cam reground to higer-perf specs, split dual exhaust or headers, single 2bbl Holley Webber carb, electronic ignition. What HP, could I develop, out of an engine such as my plans, the factory is about 115 hp, hope to get 150 to 175 hp is that possioble.....Fred Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.