Drifter99

That looks good. I installed electric PS on mine works great and wasn’t a major pain. My steering box is wore out I need to find a replacement box. Any one with experience on replacement steering boxes..

Exactly a compass,,

I sure your aware that the rods are off set just a reminder..

Many post here have stated and my personal experience was when we pulled out the freeze plugs the block was packed solid with build up.My temp was fine but then when I took the engine apart I got three coffee cups of debris out of it. If it's never been clean out you would be supprise what in there. Just my opinion not fact,, good luck

Using the universal joint off the Saturn having a sleeve to connect to the steering shaft . And a sleeve from the steeringwheel to the top of the unit

I am in the process of installing the electric ps in my 48 truck. Just started yesterday by cutting the colum . Making my mounting brackets today. Went with the Saturn unit.

Ill try the voltmeter in the morning,, thanks

After the fact I put a runz on it I am guessing I need a new guage . That's why I was confused the needle still moves to full so can the guage be bad and the needle still move?

Trying to determine if I got two bad guages . On both with the wire coming from keyswitch to the guage conected I get no juice on the other post with my test light but the guage does go to full.Can the needle move and the guage still be bad? Thanks again

Thanks for the info I think this guage kick my butt off to auto zone for a guage

Iam in the middle of the gas guage dance i have read all the post but couldnf find my answerd. I've converted to 12 v the wire from the switch witch side of the guage does it go to tall post or short. Thanks for any help

That's clean good snag John

Yes I've got a blank one from them need to stamp it with the information. Thanks

Would somebody post a picture and information of the I D plate in the driver door. I tryed to search it " no results comes up 1948 b1b. Thanks

Thanks guys that cleared it up some. Just finishing my build a little late to post. Thanks again