Knowinghades63 Posted February 27, 2023 Report Share Posted February 27, 2023 I purchased the eci front disc brake conversion kit and i have a question for anyone else who may have purchased the kit. the kit comes with a brass hydraulic manifold that has two mounting holes. the problem for me is the holes are all located in a way that if i mount it directly to the frame then the brake lines have to bent at really sharp angles as to stay above the frame . im just curious if anyone else has ever used the kit and if so where did they mount the manifold at? Quote Link to comment Share on other sites More sharing options...
Sam Buchanan Posted February 27, 2023 Report Share Posted February 27, 2023 I haven’t seen the manifold but could you mount it with an “L” shaped bracket to put it at a better angle? Quote Link to comment Share on other sites More sharing options...
Adam H P15 D30 Posted February 28, 2023 Report Share Posted February 28, 2023 Are you talking about the combination valve? Here is how I mounted mine on my 56 Panel. Never mind the brake fluid drip, I spilled topping the master cylinder off. Quote Link to comment Share on other sites More sharing options...
moparfun Posted February 28, 2023 Report Share Posted February 28, 2023 Pictures always help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.