nonstop Posted December 9, 2022 Report Posted December 9, 2022 (edited) Hi All! I am at the point that I would like to do some of the wiring for my truck - 1951 B-3-B. I ran new wiring from the dimmer switch to the front and rear lights when I added turn signals. I now need to do the charging circuit and under the dash. I have bought from Rhode Island Wiring before and really like their harnesses, but for the truck, I decided to make my own. On the DPETCA site, there was a link about how to make one and it contained wire lengths, gauges, etc. obviously, I can’t use that at this point. I even tried the Wayback machine and that did not work. Does anybody have a copy of this article or a write up about how they did theirs? I tried looking, but could not find anything. Please forgive me if it is there. Thank you! Nick Edited December 9, 2022 by nonstop Quote
buck0wens Posted December 9, 2022 Report Posted December 9, 2022 Just saw this the other day. Should have what you're looking for. Quote
nonstop Posted December 9, 2022 Author Report Posted December 9, 2022 Thank you, I tried that site, but I was unable to bring anything up. I was hoping someone might have saved it… Thank you! Quote
BobB Posted December 9, 2022 Report Posted December 9, 2022 I have several diagrams collected from the site over the years. I've attached a couple that are under the 3Mb limit. I have one file that provides extensive text from the gentleman that did the harness build, but it is almost 14Mb. My e-mail is bobtdy@gmail.com if you'd like to give me an address to which I could send that one and I'll give it a try. I don't know if there is a common area/site where we can all drop things we've downloaded over the years, but that might be a way to reconstitute some of the information for everyone. thanks BobB B1B Wiring Harness Diagram Notes From David Erb.docx Pilothouse Harness Diagrams - 3.pdf Quote
billrigsby Posted December 9, 2022 Report Posted December 9, 2022 These are three files I have sourced? Either HERE or DPETCA (Three Posts) (I had to split one of the PDFs into three sections) Post1 Post2 Post3 Quote
buck0wens Posted December 9, 2022 Report Posted December 9, 2022 Don't go to the the site ... read the thread and a way down are links to some of the files that used to be on the site including a wiring harness one I believe you're looking for. I have the files if you're still having issues but I downloaded them from the links on that thread not 2 days ago. Quote
nonstop Posted December 11, 2022 Author Report Posted December 11, 2022 Thank you all for the help and resources! It looks like I will have a little bit of a project ahead, but now have some good resources! Quote
B1B Keven Posted December 11, 2022 Report Posted December 11, 2022 https://enginebarn.myshopify.com/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.