fireguyfire Posted March 12, 2022 Report Posted March 12, 2022 Is there a way I can bench test the 6 volt coil (with the armoured wire that goes to the ignition switch) that came in my 1940 1/2 ton to ensure that it is still good and useable? Quote
47 dodge 1.5 ton Posted March 12, 2022 Report Posted March 12, 2022 Easiest to put on a known system that works IMO. You would need to check it when hot and added vibration to determine if it is “good” for service. Quote
nkeiser Posted March 15, 2022 Report Posted March 15, 2022 Use an ohm meter to check resistance of the primary and secondary windings. There are lots of videos that explain which is which. The same procedure applies for both 12V and 6V. The only difference will be the resistance. I found this link that mentions what the values should be. http://www.farmallcub.com/phpBB2/viewtopic.php?t=16903 . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.