Help with linkage please "Solved"

[Los_Control]

I can use some thoughts on this issue I created. I removed this screw and probably should not have.

Now with the screw installed I no longer have reverse or 1rst gear.

When I lift up and shift to reverse, linkage feels normal but I am in 2nd gear,  Lift up and shift to 1rst and I get 3rd gear.

Shifting was fine before I removed the one screw .... I assume there must be a procedure to follow.

The shop manual I have does not cover linkage, I have a motors manual coming from ebay but wont be here til next week. Hoping it will cover it.

While searching the internet just finding instructions for adjustment.

 

Today I wanted to back it up into the driveway and run a lot of water through it to flush it out. Really disappointed in how much rust & sediment sitting in the head after flushing it out last year and then just draining the water out.

Edited May 16, 2020 by Los_Control

[Los_Control]

I dunno, I decided to reach down and just shift it manually for now. To do what I needed.

And now all gears are working as should. I guess one linkage got moved or some thing?

[JBNeal]

additional information - Column Shifter Adjustments