38 plymouth rear fenders

[P4coupe]

I have a pair of 38 plymouth rear fenders from a Cpe, I was told. What years/models  will they fit? 

thanks in advance

[desoto1939]

according to my Hollander book All rear fenders fit 1937 thru 1938 Plymouth 

1937: P3 r and P4 all version

1938 P5 and P6 all versions

 

Also Desoto 1937 thru 1938

Dodge 1937 thru 1938 all version

Chrysler 1937 C16 1938  c18

 

Hope this helps.

 

Rich Hartung

Desoto1939@aol.com

 

[P4coupe]

Thank You for the help. I'm like a lot of other folks are cleaning out and organizing our collections. In the same group of parts were the two fender braces, The front seat with out covering and I don't remember it but the trunk lid. Probably the most sought part of the bunch. The fenders have surface rust, but no rust through. The trunk lid has a some minor rust through, but little compared to what I had to deal with on my 37 CPE. May I ask for your help one more time please.

Thanks Harold

[desoto1939]

Harold what do you need help with?

 

Rich

[P4coupe]

You are right I need some help. I pulled out the fenders from a make do storage (Been there 8 years) and discovered that there are two front fender braces, the two rear fenders no rust through, the split seats with no upholstery, and the trunk lid, all from the same 38 coupe. The seat looks same width as 37 but has a gear adjustment, fender braces look the same as 37, but the trunk lid what will it fit?

Thanks in advance

Harold

[P5 Dale]

I know this post is a bit old, but if you still have the ‘38 fenders I would be interested. In what region do you live?  Hopefully close to Missouri?

[P4coupe]

Yes still have them. I will take some more photos on Sunday for you . Have both rear fenders. 

located Warrenton Va

[Bobb Horn]

I had three 37s, and two 38s at the same time, and my Uncle had a 36 for many years.      The front fender brackets fit 37 and 38s, and I believe they fit my Uncle's 36 also.      Still have my one 38 I bought in 1986.     Used fiberglass fenders on the rear, the originals just need more work than I can do.

My Coupe seat is a third row seat from a Chevy Suburban.     Good luck with your projects.....Bob

[John Fournier]

I am also interested in purchasing the rear fenders. Do you still have them?

[P4coupe]

YES

[DJ194950]

About time to use PM to ask such on the forum?

 

Jus askin',

 

DJ

 

[John Fournier]

Harold call me, about the fenders John at 860 301 3117

[Ply 38]

I’m looking for rear fenders for a 1938 Plymouth and a trunk lid steel or fiberglass doesn’t matter thank you Don

On 3/6/2021 at 4:46 PM, John Fournier said:

Harold call me, about the fenders John at 860 301 3117