Kevin Posted March 17, 2020 Report Share Posted March 17, 2020 Anyone have a part number for these bearings ? I am in need of a replacement bearing for the front of my 1950 Dodge truck . Can't seem to find a number for the one in it now Quote Link to comment Share on other sites More sharing options...
Charlie Stephenson Posted March 17, 2020 Report Share Posted March 17, 2020 press it off and check the shoulders on the under side for numbers should be 206 XX or something like it, three numbers and an x or tow for the snap ring designation. Charlie Stephenson Quote Link to comment Share on other sites More sharing options...
Charlie Stephenson Posted March 17, 2020 Report Share Posted March 17, 2020 oops, the xx is for seal designation I forgot what the characters are for snap rings, someone else help. Charlie Stephenson Quote Link to comment Share on other sites More sharing options...
Brent B3B Posted March 17, 2020 Report Share Posted March 17, 2020 Kevin, I recently replaced the bearings in a 4speed on my B4D, I took the old ones down to “McGuire bearing” (they are local to me) they measured and matched the old and had the replacements on the shelf. have you called https://www.neill-lavielle.com ? Seems like they might point you in the right direction to someone local to you that can match Quote Link to comment Share on other sites More sharing options...
9 foot box Posted March 17, 2020 Report Share Posted March 17, 2020 Hey Kevin, my parts book has a 619167 number that is superceded by 856455. It lists as a 12 ball, 1.3780" I.D., 2.8346" O.D., .669" thick. If those measurements work, hilltopautoparts has a NOS one for $95. Other listings for that number show fewer ball bearings. Good Luck. Hey Brent. 1 Quote Link to comment Share on other sites More sharing options...
Kevin Posted March 17, 2020 Author Report Share Posted March 17, 2020 Thanks for the info .I pressed off the old front bearing inside was chewed up where the marking would have been . Thanks for the part numbers. I am getting closer to finally have this truck on the road after setting in the garage for 32 years. Quote Link to comment Share on other sites More sharing options...
Kevin Posted March 21, 2020 Author Report Share Posted March 21, 2020 thanks to everyone for the help .I found the bearing (in stock ) at Carid.com , they had a Timken bearing to match the national 1207L front bearing that I needed. The rear bearing is National 1209SLand the rear housing seal is National 8160S . 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.