Koni shocks

[D Cienega]

Has anyone used Koni. classic shocks or can recommend some for my 48 Plymouth four door Special Deluxe . I’d like to get a better ride with a good alinement and better shocks .

 

 Thank you 

[greg g]

I used A body rear shocks on my 46, gas charged Monroe's. And standard Monroe stock replacements on the front.  Not a sport coupe but much better than what I took off.  While you are there, change the rubber spring bushings in the rear.  That made a noticeable difference in the way the car tracks through turns.  Be very careful removing the front shocks the mounting studs are really getting hard to find.  I'd in doubt use lots of penetrating oil in multiple applications, and the blue flame wrench if still resisting.  Doesn't take much to twist them off.

 

The a body were mid 60's dodge dart and are a hair short so some levering of the diff was needed to wrestle the bottoms on.  Have not encountered any bottoming issues even with a full trunk and gas tank.

I have the numbers in my notes somewhere will post them if I find them.

[D Cienega]

Thank you Greg 

[JBNeal]

From Monroe's search engine:

 

Front:  Monroe 5752

Rear:  Monroe 58567 (includes hardware pkg)

           Monroe 37078 (no hardware pkg)

           Monroe 37112 (no hardware pkg)