rallyace Posted June 23, 2019 Report Posted June 23, 2019 I am looking for a source for the clip that holds the 1/4" throttle linkage ends. It fits on the bell crank and snaps onto the rod right after the 90 degree bend at the end of the rod. I would post a picture if I had another clip. Thanks. Quote
tom'sB2B Posted June 23, 2019 Report Posted June 23, 2019 Is this what you're talking about? https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F152747585662 Quote
JerseyHarold Posted June 24, 2019 Report Posted June 24, 2019 Have you tried the Dorman 'Help' rack in your local parts store? They usually have carded linkage clips that would work. Quote
rallyace Posted June 24, 2019 Author Report Posted June 24, 2019 . That is exactly what I was looking for. I checked ebay and only found the ball type. Thanks! Quote
rallyace Posted June 24, 2019 Author Report Posted June 24, 2019 JerseyHarold. Our local chain parts purveyors do not have the Dorman rack of goodies. The kid at Pep Boys was zero help as his computer did not show any linkage parts for a 1951 Plymouth. I will have to head over to NAPA tomorrow where they have real parts people. Quote
Jerry Roberts Posted June 24, 2019 Report Posted June 24, 2019 Look carefully as they come in left or right configuration . Quote
rallyace Posted June 24, 2019 Author Report Posted June 24, 2019 Five minutes at NAPA and I am all set. Thanks for the help! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.