blue p15 Posted March 16, 2019 Report Posted March 16, 2019 I'm still wrestling to get the steering wheel off my '36 P2. I don't want to get anymore aggressive (heat, etc) until I know I can find another wheel if this one gets damaged. Anybody have one hanging in the garage? Quote
desoto1939 Posted March 16, 2019 Report Posted March 16, 2019 (edited) With the pre 38 Mopar cars you need the puller that goes around the base of the steering wheel housing and then a bolt pushes against the steering wheel shaft. You might find a Truck puller like a snapon one on ebay for trucks. I have attached a copy of the factory Miller steering wheel puller so you can see how it was done at the dealerships. The correct puller is very hard to find even on Ebay. Some members have used a bearing puller and adaptaed it to work just take your time. Rich Hartung Desoto1939@aol.com Steering wheel puller Mopar.docx Edited March 17, 2019 by desoto1939 1 Quote
Dodgeb4ya Posted March 17, 2019 Report Posted March 17, 2019 (edited) Just use a bearing splitter and puller something like this... It will pull only on the metal ring below the delicate wheel material..... leave the nut loose on the steering shaft threads to prevent the puller from crushing the threads. Pictures of modern set up and the factory Miller puller like would be used on your P2 Edited March 17, 2019 by Dodgeb4ya 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.