meadowbrook Posted October 25, 2016 Report Posted October 25, 2016 Hey guys, would you say a 3/16" fuel line between the fuel pump and carb is too small for a stick 230? The inlet fitting in my 'new' Stromberg BXVD3 seems to be made for a 3/16 line with a bubble flare. Quote
knuckleharley Posted October 25, 2016 Report Posted October 25, 2016 No,but if that bothers you,you can always run a reducer between the fuel pump and the carb to make things fit. Quote
Los_Control Posted October 25, 2016 Report Posted October 25, 2016 I just went through this myself. The proper size from the pump to the carb is 5/16", with the carter ball and ball. I bet it would be the same with the stromberg also. With mine, all the male brass fittings that screw into the carb, fuel filter, fuel pump are the same 3/8" O.D. thread, the female end is larger and accepts the 5/16" . Probably be easier to keep it all the same. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.