Mikey Posted November 11, 2015 Report Posted November 11, 2015 I took off all doors on my 1948 Dodge town sedan and im having a problem aligning them. How do you adjust them, I need help Quote
Plymouthy Adams Posted November 11, 2015 Report Posted November 11, 2015 did you remove the hinges from the recesses? IF not it is simply a matter of aligning the door in the opening with even gap. did you have to replace rockers, floor or other metal in the vicinity...if so was this done with the doors off...I never recommend metal repair with the doors off...too much chance of shifting and you have nothing to gauge or correct by with the doors removed....they are you best all around go no gauge.. to help with the alignment..remove the striker on the post...will eliminate the interference of this and take the aggravation of latching/unlatching from the equation...the book had a good section on body alignments...read this section again... Quote
DJ194950 Posted November 11, 2015 Report Posted November 11, 2015 (edited) maybe some Chrysler tips will help ? http://www.imperialclub.com/Repair/Lit/Master/025/CoverBig.jpg Seems I only attached the l;ink but if you you go to their site and look for the link it has factory door alignment tips. Edited November 11, 2015 by DJ194950 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.