Pilot House rear corner windows

[Jerry Roberts]

I am trying to verify that a pair of rear corner windows that I have are for the 1948 - 1955 Pilot House trucks . Does anyone have a window out that they can measure ? I have seen other similar windows for what was probably Chevrolet . Measured across the curved exterior it is 11 3/8 inches . Measured across the exterior top to bottom it is 10 inches . See photos . Thank in advance . 

[Jeff Balazs]

Jerry that match's with the badly scratched ones I removed from my 52.

 

Jeff

[ggdad1951]

I am trying to verify that a pair of rear corner windows that I have are for the 1948 - 1955 Pilot House trucks . Does anyone have a window out that they can measure ? I have seen other similar windows for what was probably Chevrolet . Measured across the curved exterior it is 11 3/8 inches . Measured across the exterior top to bottom it is 10 inches . See photos . Thank in advance . P1010019.JPGP1010020.JPGP1010021.JPGP1010022.JPG

 

pretty sure that the "off brands" are actually taller (and uglier) than the PH ones.  If they are the same height as the center rear you are good to go.

[HanksB3B]

Define "off brands"...Chevy ?

 

Hank 

[Jerry Roberts]

Jerry that match's with the badly scratched ones I removed from my 52.

 

Jeff

 Thanks for checking that Jeff , I hope that you didn't have to spend too much time digging out your old glass . I have a two car garage and we park two cars in it . My own stash of other parts gets to be really buried . 

[Jeff Balazs]

Jerry;

No problem at all. I knew right where they were. For once.

 

Jeff