casper50 Posted January 19, 2015 Report Posted January 19, 2015 I've searched the forum and found the thread that Greg G says sbc head bolts from Pioneer work but only find the same thread. NAPA, O'Rillies, and Auto Zone have the sbc kits but only 2 of the bolts in it are close to ours. Anyone know the part # for the sbc bolts that are close to ours? Quote
greg g Posted January 19, 2015 Report Posted January 19, 2015 Got them through the machine shop. Pioneer Parts # 362. They were under a dollar when I got them 12 years ago. If you can't source them by brand, that should give you a number to cross reference. Quote
48mirage Posted January 20, 2015 Report Posted January 20, 2015 Is this them? http://www.summitracing.com/parts/PIO-PG-362-25/ Quote
greg g Posted January 20, 2015 Report Posted January 20, 2015 Yes but I was able to get only 20. Yes I know there are 21 but I used some of the threaded head type for carb linkage and ground strap. Quote
casper50 Posted January 20, 2015 Author Report Posted January 20, 2015 that's them thanks. Strange I searched summit as well. Quote
captden29 Posted January 20, 2015 Report Posted January 20, 2015 I had to re-use the one for the carb linkage as I do not know where to get that one new. I did get the same pioneer head bolts at my local machine shop.i will be pulling the head within the next month. not sure if I will buy new head bolts. I have put the head back on mostly using the old head bolts and by getting new bolts. outcome seems to be the same. capt den Quote
casper50 Posted January 20, 2015 Author Report Posted January 20, 2015 I've bought everything else new to rebuild it so didn't want to skimp on head bolts especially at $1 each. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.