Shock part number for P20

[50plywood]

I am trying to come up with a part number for some shocks that will work on a 1950 Plymouth station wagon. I believe they are the same as the Suburban.

[desoto1939]

go to the monros shock webpage and they will guide you throught their various shiocks and come up with a monroe shock for your car.

Rich HArtung

Desoto1939@aol.com

[50plywood]

There is no listing for the wagon and Suburban that I can find. I believe that the Monroe 5752st with the bushings changed to 3/4 id will work. I think it's they will work for other early 50's Plymouths also.

[50 coupe]

I got mine through the Summit Racing web site along with spring perches for the rear end. On their site you can search for parts on your car make, model and year and it will tell you what they have that fits. That is how I got shocks for my 50 Bus. Coupe and they were the right fitment.

[DJ194950]

The 50 Ply. parts book only shows two different part #'s used. Stock 1" dia. shaft and a 1 3/8" shaft heavy duty with NO model breakdown per application. So, either should fit all models.

 

Just suggest using a heavy duty cross over shock for 50 Plymouth.

Have found Monroe 3100 or 5752 May be what you need.

Monroe has a website and look around their site and find the spec. page . gives all open/closed measurements, mount type, size of the mount, etc.of all the shocks they make.

Then do a search for that make and # for the best price avail.!!

 

Best.

 

DJ