Who's running Langdon Holley Webers?

[Olddaddy]

I am planning to run a single 2bbl Holley Weber from Langdon's Stovebolt. I can't reach Tom right now and I have a question. What is the top diameter of the carb where the air cleaner mounts? I want to modify my oil bath air cleaner base to fit the HW carb. I am getting ready to send a bunch of stuff out for powder coating and would like to include this as well. Any measurements, pics etc. would be helpful, and apprciated as always.

[Don Coatney]

Charlie;

Not sure if what you want to do is doable. I am not at home so I cannot do any measuring, However here are a few pictures.

[Reg Evans]

Charlie, Here's the progressive 2 bbl carb that Tom Langdon recomended I use on my 230 2 bbl intake. Man...it sure has a small primary barrel. The air cleaner he sells has an adapter that fits the oval carb opening. The opening measures approx. 2 7/8" x 4 1/2". I'm not sure I'm going to use it since I found a NOS Carter 2 bbl that fots the studs on my 230 2 bbl manifold.

[Reg Evans]

Here's the one I'm gonna use instead. It fits the 56 Plymouth 2 bbl manifold.

Sorry Ed.

[blueskies]

Charlie;

Not sure if what you want to do is doable. I am not at home so I cannot do any measuring, However here are a few pictures.

Don-

Are your carbs the Holley/Carters? My Holley/Webbers have the diamond shaped throat like the one that Reg posted.

Pete

[Young Ed]

Here's the one I'm gonna use instead. It fits the 56 Plymouth 2 bbl manifold.

Sorry Ed.

No biggie Reg. I'll keep looking. I've come close twice now!

[rearview]

I picked up a NOS / vintage rebuilt Stromberg 2bbl a couple months back. Number 3-144, a little surface rust on the butterflies, etc. I may be willing to part with it since I'm probably going a different direction

Bob

[Reg Evans]

I picked up a NOS / vintage rebuilt Stromberg 2bbl a couple months back. Number 3-144, a little surface rust on the butterflies, etc. I may be willing to part with it since I'm probably going a different direction

Bob

Bob,

Would you email me a photo and how much you are asking for it?

regoevans@sbcglobal.net

Reg

[rearview]

PM'd you Reg