MBF Posted August 25, 2011 Report Posted August 25, 2011 Before I take this apart to replace the wheel cyls (ordered today) I found that I also have a leaky inner seal. I have the p/n for the outer and a new one on the shelf. Does anyone know what the p/n is for the inner on a 1 ton? Tx. Mike Quote
ggdad1951 Posted August 25, 2011 Report Posted August 25, 2011 I got mine from Roberts he should know waht ya need I was stupid and forgot to write the number down. Quote
Dodgeb4ya Posted August 25, 2011 Report Posted August 25, 2011 Here are some seals/ #'s that I use on the older 1941-53 Dodge 1 ton rear inner Drum Hub... Old Victor #9426 C/R #28116 Nat'l #417485 Bob Quote
Desotodav Posted August 25, 2011 Report Posted August 25, 2011 I know what you've got ahead of you all too well Mike - I just finished installing my inner seal on my 1/2 ton yesterday. Be sure to clean out the breather on top of your axle while you are messing around under your truck. That seems to have been recommended a few times on past threads. Have fun! Desotodav Quote
MBF Posted August 25, 2011 Author Report Posted August 25, 2011 Thanks Folks. Greatly appreciate the help. Mike Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.