Bradley S. Posted October 12, 2010 Report Posted October 12, 2010 Hey; Does anyone have any ballpark empty weights for our trucks? Curious about all , but specifically my B1F128. Might need to trailer it and was wondering how big a trailer I will need. Thanks! Brad Quote
49Bseries Posted October 12, 2010 Report Posted October 12, 2010 The best that I could figure for my B2C was about 5800 lbs. I used a UHaul car hauler (the double axle kind that you drive the entire vehicle up on) without any problems. Quote
bach4660 Posted October 13, 2010 Report Posted October 13, 2010 the registration lists the curb weight as 3200lbs Quote
wallytoo Posted November 6, 2010 Report Posted November 6, 2010 (edited) there's no way a b1f weighs only 3200 lbs. my b1fa152 weighs over 4.5 tons. with just a chassis, i'd expect the b1f to weigh over 6000 lbs. Edited November 8, 2010 by wallytoo 1 Quote
Stumpy(NH) Posted November 7, 2010 Report Posted November 7, 2010 I just got a '48 B1 FA 152 with a 10 foot dump on it a couple of days ago. I went across the scales @ the local dump and got a tare weight of 7,800 lbs. Quote
billschwindt Posted November 7, 2010 Report Posted November 7, 2010 I have a 1949 B1F 128 & had it weighed this last month it weighed 6600 lbs. Quote
wallytoo Posted November 7, 2010 Report Posted November 7, 2010 I just got a '48 B1 FA 152 with a 10 foot dump on it a couple of days ago. I went across the scales @ the local dump and got a tare weight of 7,800 lbs. don't suppose it's green, with a gravel body dump? Quote
Stumpy(NH) Posted November 7, 2010 Report Posted November 7, 2010 I'm guessing that you have seen this truck. I have been cruisin' around this weekend......what a nice truck!!! Quote
Dodgeb4ya Posted November 7, 2010 Report Posted November 7, 2010 I'm guessing that you have seen this truck. I have been cruisin' around this weekend......what a nice truck!!! Now thats a nice Flat-nose workin truck. I like it! A lot Bob Quote
wallytoo Posted November 8, 2010 Report Posted November 8, 2010 I'm guessing that you have seen this truck. not only seen it, i've worked on it. friend up the road had it for a short time, sold it about 5 months ago. has the saddle tank instead of the tank between the framerails. the original fuel filler isn't attached to anything. it had a plywood headboard that we junked, since it looked terrible. it's a nice rig, and the two-speed works. the tires are pretty good, too. Quote
Dodged_7 Posted May 1, 2019 Report Posted May 1, 2019 Looking at a 1948 B1F. 152 wheelbase. It's in pretty rough shape but a good project. Anyways its 2hrs away from me and curious as to what it might weigh. It doesnt have a bed. No fuel tank. Hood. Etc. Basically it is a cab, engine, and chassis. Any ideas? Quote
wallytoo Posted June 23, 2019 Report Posted June 23, 2019 the information above didn’t provide any clues? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.