Alshere59 Posted September 19, 2010 Report Posted September 19, 2010 (edited) I have a 50 Plymouth and am using 2 BB carbs with a 4 inch diameter air cleaner. Looking at it after I rebuilt the spare carb the heater may be in the way. Anyone have this running? The Fenton is 7 1/2 inches center to center. Not sure what the Offies etc are? Anyway thoughts? I think I will have 1/8th inch clearance using the air cleaner shown after the install. Its the smallest I found that fit the carb. Al Moved to the car side Edited September 19, 2010 by Alshere59 Double post Quote
Reg Evans Posted September 19, 2010 Report Posted September 19, 2010 Al, Did you know you posted this question on the truck side? You might get more experienced responses on the car side about the car heater. Is that the stock heater for the car? Is the Fenton manifold heated by water or by the exhaust manifold or not at all? Quote
Alshere59 Posted September 19, 2010 Author Report Posted September 19, 2010 Actually no I didnt see it was the truck side. Had a few try's before it took. The Fenton is standard heating. So exhaust gas heating unless a split exhaust. Now how to move it over. Quote
Frank Elder Posted September 19, 2010 Report Posted September 19, 2010 Just repost it on the carside. Maybe you will get answers from both threads. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.