Wheel cylinder boring (sp?)

[adam_knox]

Anyone know of places around Milwaukee to get wheel cylinders bored out? Hoping for a day turn-around (and hoping it wouldn't cost a million bucks!Could I just lightly sand the surface rust out, or am I likely to make it out of round then?

Thanks gang!

[RobertKB]

Buy a brake hone at any automotive store. Follow instructions. Easy and cheap. However, if you have any pitting, I would recommend having the cylinders resleeved or probably cheaper yet, buying new ones. I know NAPA has them.

[JIPJOBXX]

I bought one of these wheel cyclinder hones at NAPA and at the time it cost around 15 dollars. Worked really good and save a bunch of money of what it would have cost at a machine shop. But if there is to much detoration on the bore part of cyclinder than you might just think of buying new rebuilt cyclinders.

[Jerry Roberts]

You want to end up with a surface as smooth as glass . I used to use crocus cloth for the final smoothing , using it wet with brake fluid . As stated above , any pits , sleeve or replace .