longtops Posted November 16, 2008 Report Posted November 16, 2008 hello ,i am working on a unmolested 52 thousand mile 1950 coronet. my first 6 volt system. the turn signal works fine on one side,will not blink on the other side,front or rear.i'm thinking flasher or bad ground. any ideas? where is the flasher located? thanks ."longtops" knoxville tn. Quote
greg g Posted November 16, 2008 Report Posted November 16, 2008 check the bulbs first, if one is bad, front or rear, neither will light nor flash. If the bulbs are good, the check the grounds. 6V is very sensitive to good tight and clean grounds. If those are good then it might be in the wires. Quote
Phil Martin Posted November 16, 2008 Report Posted November 16, 2008 Flasher is under hood on firewall and different than any I've ever seen. Probably get one from roberts but check wiring to lights first. Wait til you look for brake light switch, It is in line back by rearend. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.