Ken_B

We aren't a "brandist" household here haha, lots of old junk to work on. Ok maayybe it took 15 minutes to put together

Little tool I put together today while doing some work on my brakes. The plug on the top of the master cylinder just would not budge and it was already a little rounded from the previous owner using a hex socket on it. Its just a 3/4 inch (hence the mark on the side to remind me) nut welded on top of two pieces of 1 inch angle shaved down to fit on the square head of the plug on top of the master cylinder. Works like a charm and only cost me about 10 minutes of time and a little scrap metal I had laying around.

Its up to the discretion of the poster of the challenge, so in this case it would have been Don Coatney's call. But olddoge41 got it so it doesnt really matter.

olddodge41 just beat me too it! Nice looking car!

Cool project! I recently replaced my 6 volt harness with a new 6 volt kit from a company called Ron Francis Wiring, they do 12 volt as well. I was very happy with the quality of the kit for how reasonably priced it was! It takes time and patience but a total rewire is not out of the realm of somebody with a decent level of mechanical knowledge. The one nice thing about using a kit is each wire is marked every 6 inches or so with what it goes to so running the wires is really pretty easy. This harness sounds about like what you are looking for. https://www.ronfrancis.com/prodinfo.asp?number=WR-95

Very nice cars! Yep Tod sets the next challenge, a steam engine you say? Hmm.. That's a good one!

The Picture Game I've played versions of this on other forums before, It can be a lot of fun. Since the weather is warming up and its prime driving season, I though it would be a good idea to throw this idea out there to see if anybody else wants to play along. The game is played like this: a picture challenge is made, such as "your car at a beach". The first person to post a picture of their car at a beach wins and picks the next challenge. Nothing too hard and only new pictures please. The idea is to get out, go for a drive, and have some fun! I will start it off with a picture and a challenge. Lets see you car next to a body of water, ocean, lake, river, creek, etc..!

Been a little while since I was able to post here, I ended up just going with a new universal 6 volt harness. I have been very happy with it, its nice to have all my lights backup and working and be able to drive my car! Thank you everyone for all the help, tips, and tricks!

Update Replaced the headlamp switch and still no lights, I am starting to think the wiring in this thing is just to far gone to make work so it look like I am going to just have to rewire it. Tried supplying power to just the brake pressure switch and still no brake lights. Does anybody have a good source for a wiring diagram? Think I am going to need one. And it looks like I will be ordering a wiring kit here soon too.

Thats a beauty!

There is power to the headlamp switch, so its looking like the switch itself is bad. I cleaned and made sure all the connections were good, still no lights. Looks like I need to find a headlamp switch, I have found a couple on ebay any other good sources for one?

So as far as functionality it sounds like I need to test the headlamp switch and make sure that's not the problem first and go from there. I do like the idea of a kit like the one RI has, but it sure is spendy. I will have to look into a wiring diagram and see if I feel like I'm at the skill level to do one wire a time myself. Is the headlamp switch something that is still available, or am I going to have to try to fix the one I have if it turns out to be faulty? Thanks for the help!

I did a search on here and was coming up dry for an answer to my question, if I missed it please excuse my terrible computer skills. I am thinking it is time for to re-wire my 1951 Cranbrook for several reasons, one the lights dont work, only the turn signals work, no headlamps,tail lamps, brake lamps etc.., two the wiring itself is not in great shape with some previous "backyard" repairs, and three the insulation is getting pretty iffy looking being very old and cracked. My questions are; Who has done this to their car? Do you have any tips or tricks? I want to stay 6 volt positive ground, what is out there in the way of wiring kits, stock replacement and universal? Thanks for the help!

Time for a little update. I have really been enjoying driving this car and tinkering with it! In my spare time lately I built a new mount for the alternator so it actually fits well and has proper adjustment, I dialed in the carburetor and adjusted the timing, adjusted the clutch, installed new universal joints(thanks for the info about what type to get!), and have been putting more miles on it! My Grandfather was in town yesterday so he finally got a chance to see the car and take it out for a drive. He was all smiles and really enjoyed the car. It really took him back to his younger days, he felt right at home in it and I have to say was more smooth than I am behind the wheel. I had to grab a couple pictures of that so here they are. Please ignore my messy garage in the background haha.

That things a beauty! I have always liked that color!