Jump to content

B1B Keven

Members
  • Posts

    2,322
  • Joined

  • Last visited

  • Days Won

    13

Everything posted by B1B Keven

  1. Glad to hear it Jeff. Thanks!!
  2. John, You can take the small arms out of the motor and turn them 180 degrees. That'll do the trick.
  3. Congrats Jeff!!! Looks awesome.
  4. This helped me. I've got a Carter B and B for sale if you need it. Keven
  5. The grinder worked!!! Thanks all.
  6. I have to set my choke at 1/4 to 1/3 open to get it to run. I also rebuilt my carb. With the motor running, when you rev it, the choke will open as needed.
  7. Someone has put steel grille bars (painted) from a '50 on it. I even did that at one time.
  8. Landon, There are two different length 'close pins' (the piece between the shoe and the wheel cylinder. Maybe you ended up with the long ones?
  9. Did you re-polarize the voltage regulator? With no wires connected to the fuel gauge, it should read between 25 and 30 ohms.
  10. Are all of the adjustments for the shoes all the way in? Did you crack the bleeder valve and try to push the shoes further in?
  11. Yes, they'll fit.
  12. These are also made by the Anderson Co. 12 3/4" from pivot to blade mount.
  13. I got blades at NAPA. Part number WIP 601233 Do you not have the arms?
  14. Does it have a heater? Model 61? Parking light assemblies?
  15. Paul, If you can get the lower grille bar, I'll buy it. Speedo and gauges also.
  16. Welcome to the forum!!! Nice truck. I've got a '49 also.
  17. Should have pulled the heat shield off of the motor in the back of my parts truck.
  18. Yay!!! I have a pair of headlight buckets. PM me if interested.
  19. It wasn't lightning or funny and my post was most definitely called for. This has been handled via PM. Thanks for your 2 cents worth Mike.
  20. Don, is this kind of post really necessary? Did you help him? What was the reason for your post, to help someone else?
  21. Oh, and before you hurt yourself, the lug bolts on the drivers side are left hand (reversed) thread!
  22. Thanks Neil. Mailed out today.
  23. Congrats!!!! Woooohoooo.
  24. Congrats and welcome to the forum!!!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use