BobT-47P15 Posted December 9, 2006 Report Posted December 9, 2006 I presume these are 12V. Guess they would not work on 6V. Look like a simple way to brighten the tail/stop lights. They also make one with a single contact. They are in an ebay seller's store priced at $12.50 each. Link to the store: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220045006765&fromMakeTrack=true Quote
Don Coatney Posted December 9, 2006 Report Posted December 9, 2006 You can buy them at any bubble pack auto parts store for about half that price. Quote
bob_amos Posted December 9, 2006 Report Posted December 9, 2006 Watch out for some of these bulbs. While they are designed and built to replace an original 1157, 2057 and 1034 bulb, we have had a number of vehicles come in to the shop with systems that would now blow fuses after the customer installed these bulbs. If you install one in a circuit that was working with the original bulb and it now blows fuses try reinstalling the original to assure that there are no other problems present. These are real intense lights and look great. But since we have had a number of them show up on our door step with bulb related failures, I just wanted to share this with anyone thinking of installing them. Quote
Guest Dave Claussen Posted December 9, 2006 Report Posted December 9, 2006 I purchased LED lights from Lambert Enterprises and one thing they caution up front is that the LED bulb does not draw as much current and the addition of an in-line unit that increases the current draw would be necessary to make your blinker function properly. It's just a simple plug in "module" (for lack of a better term) that helps the blinker click on and off. Without it you just have a steady light when you activate the turn signal. If only the front (or back) lights are LED then the current draw would probably be enough to make the blinker work. Just .02 worth of info. Dave Quote
bob_amos Posted December 10, 2006 Report Posted December 10, 2006 Dave, you are right on that. I had forgotten all about that part of the problem with these lights. Glad you remembered though... But thet sure are clear & bright when they work... Quote
grey beard Posted December 10, 2006 Report Posted December 10, 2006 Ojkay, Gents. Here's where you can find six volt LED bulbs. What I cannot understand is that they speak of bulb polarity. Is this something peculiar tg LED' technology, or what? Go figure . . . . . . http://www.highspeedmotors.com/6VoltLEDInvoice.html Now I'm ready to sit at the feet of the mastera again and learn about LED polarity. What's the local wisdom on this one? Quote
bob_amos Posted December 10, 2006 Report Posted December 10, 2006 Yes, polarity is very important in anything that uses a diode. Diodes, by design, only permit current flow in one direction so if you had one installed that was reversed there would be no flow resulting in no light being emited. (Not all diodes emit light though.) LED stands for Light Emitting Diode so you can see the importance of polarity. Quote
Merle Coggins Posted December 10, 2006 Report Posted December 10, 2006 Well said Bob. I also read somewhere that the difference between 12 volt and 6 volt LEDs is in the resistors used. They use a resistor in series with the LED to change the voltage and current flow through the LED. If you were to use a 12v bulb in a 6v application the current flow would be too high and the LED life would be shortened. Merle Quote
BobT-47P15 Posted December 10, 2006 Author Report Posted December 10, 2006 An ad for load resisters......do ebay search for "led load resistors" and this and that I can't seem to copy will come up Quote
Guest Dave Claussen Posted December 10, 2006 Report Posted December 10, 2006 My understanding about LED's is that they have a very long life expectancy because there is actually no element to burn out. Some claims are of 100,000 hours or more. I purchased an LED drop light that is very handy for working around and under the car/truck. The up side of it is that if you "drop" the drop light, the bulb doesn't go POP and then leaves you in the dark. I have unintentionally performed this test a couple of times and it's still working great. The down side is it could be a little brighter, but it's not bad. There's also a rechargeable one out on the market now for those times when you're not near a plug in. Could be a possible Christmas gift for the wrench in the family. Quote
martybose Posted December 10, 2006 Report Posted December 10, 2006 I was reading the latest Street Rodder last night, and found a 6V to 12V converter that is specifically designed to drive LED taillights; might be worth checking out! http://www.watsons-streetworks.com Marty Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.