busycoupe Posted September 5, 2011 Report Posted September 5, 2011 I was talking about the inner seal. Sorry, I forgot to say to pull the axle, the bearing will slide out with the axle. The slide hammer trick is helpful because the seal sits a couple of inches into the axle tube and I couldn't get a regular seal puller onto it. Andy D: I put in the leather seal 4 years ago. It was the first time i had seen a leather seal on a car and I may not have soaked it in oil long enough. I just don' remember. Dave Quote
Desotodav Posted September 5, 2011 Report Posted September 5, 2011 Ahhh, the memories... I used a few home-made tools for my inner bearing and rear brake job. I found that a good size socket with a short extension bar was just the tool to tap the inner bearing in with. All is now well again! Desotodav Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.