Front Drum for B3B

[Guest Dave Paulson]

I'm rebuilding the brakes on my B3B and it appears that one of the front drums is beyond serviceable limits. Anyone know of a source for Pilot House drums?

Thanks,

Dave

[Merle Coggins]

I've got some spare axles for 3/4 ton trucks, but I think they have 11" drums verses 10" on the 1/2 ton trucks. You best bet is probably to find someone like me who's got a spare 1/2 ton axle and is willing to remove and sell a drum.

Merle

[Guest Kuster13]

1/2 ton drums that I won't need. I have not checked the condition of them but I could do so in a week or two. They are in Vancouver B.C. so if you don't find anything closer let me know.

Tom

[Guest Dave Paulson]

Merle,

Thanks, and you're correct. The front brakes on the 1/2 tons are 10 inch. The back ones are 11 inch, but I haven't even looked at those yet.

Dave

[Guest Dave Paulson]

1/2 ton drums that I won't need. I have not checked the condition of them but I could do so in a week or two. They are in Vancouver B.C. so if you don't find anything closer let me know.

Tom

Tom,

I not only haven't found anything closer but haven't found anything at all. If you could let me know about your drums, I sure would appreciate it.

Thanks,

Dave

[Guest Kuster13]

to look this weekend. Does anyone know the minimum thickness for the 1/2 ton drums?

Tom

[51 Fargo]

Tom,

I not only haven't found anything closer but haven't found anything at all. If you could let me know about your drums, I sure would appreciate it.

Thanks,

Dave

I might be able to help out here I have a pair of 1/2 drums on my 51 chassic. Iam in the middle of put my cab and box on a chassic that has a clip in it . If you can give me a couple of days I can pull them off and E mail you a pic and you can tell me if your interested in them or not ............ Barry

[Bill pilot99]

I just looked and found two 10 inch drums .

They don't look like they have been turned.

I'm in North Carolina, e-mail me if you still need them.

[paulseed]

If a B2B will fit see my listing in truck parts for sale - I'm in Ojai, CA. I had a break job done in the 90's some 10,000 mi ago they were OK then should be still good.