broadlawn Posted December 28, 2023 Report Posted December 28, 2023 Rebuilt master cylinder bench bled can not get fluid at wheels when I pump the pedal if I go to fast it looks like a small volcano I have tried traditional bleeding and vacuum please help thank you Quote
D35 Torpedo Posted December 28, 2023 Report Posted December 28, 2023 Crack lines and bleed at various points heading to the front and rear. Maybe the soft lines have collapsed. Quote
broadlawn Posted December 28, 2023 Author Report Posted December 28, 2023 Okay I will try that in the morning thank you for your time Quote
chris 48 P15 Posted December 29, 2023 Report Posted December 29, 2023 my master is from 48 p-15 there are small holes on the inside that maybe clogged when you bleed the system the master may run out of fluid also check brake lines Quote
48ply1stcar Posted December 30, 2023 Report Posted December 30, 2023 I bench bled my 48 in the car with the floor removed. I was installing front disc brakes and needed to bench bled before I was able to bled the front brakes. I removed the brake lines inserted brass plugs and slowly filled the master cylinder letting the air to escape. Quote
broadlawn Posted January 12 Author Report Posted January 12 I took the master cylinder back apart blew it out and bled it worked good thank you so much for your time Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.