1950 plymouth deluxe coupe speedo cable

[mvpcustoms]

So I been looking at post and reading til my eyes are bleeding. Putting together a car I didn't take apart. What is proper routing of the speedo cable and attachment points for bracing? Finished up the master cylinder upgrade, works like a champ. Master and ac brackets fabbed by me.

[chris 48 P15]

nice work

these are pic of 48 p 15 special deluxe trying to load other pic

[chris 48 P15]

second picture

 

[mvpcustoms]

Thanks alot, I ended up just running it out of the old armored cable hole since it's gone with the 12 volts upgrade. This car has thrown me for so many loops, like in your pic cable goes to passenger side of trans. This one is drivers side, cable was plenty long enough so it worked out.

[Saskwatch]

Thank you both for the pictures you have included with your posts, it is very helpful for those of us that are in the same boat trying to figure out what goes where!

    I for one , am also very interested in your master cylinder set up & your water temperature sending unit, if you have the time to tell us about those ,would be appreciated ….. very nice, quality workmanship ?

 

[mvpcustoms]

Water temp sending came with the dolphin gauge set. Master cylinder is from 60 thunderbird and I fabricated the mounting bracket.