mvpcustoms

pics were just an example, ive locked them down several times and no problems. finished product has additional support brackets and bushing in arm from master, no flex and no play. thanks for advice though

one of the safest things you can do is change to a dual master on the brakes

Water temp sending came with the dolphin gauge set. Master cylinder is from 60 thunderbird and I fabricated the mounting bracket.

Thanks alot, I ended up just running it out of the old armored cable hole since it's gone with the 12 volts upgrade. This car has thrown me for so many loops, like in your pic cable goes to passenger side of trans. This one is drivers side, cable was plenty long enough so it worked out.

So I been looking at post and reading til my eyes are bleeding. Putting together a car I didn't take apart. What is proper routing of the speedo cable and attachment points for bracing? Finished up the master cylinder upgrade, works like a champ. Master and ac brackets fabbed by me.

had to come get on the computer, on my phone thats all it would let me do. i just clicked on reply and it still says loading. anyway to correct it? had to resize photos all the way down just to upload them.

I just made one, thanks. I might as well start selling parts hell, everything I end up needing I end up making?

That spring part number is not coming up anywhere, I messaged that seller to see if he has an actual pic of the part. Don't want to order if it's not correct, it says for 40-48 dodge truck on his listing.

Thanks I'll look it up

Fenders, core support, bumpers, inner fenders, etc. Does anybody sell a kit, we buy them for other cars all the time

Hey sniper you got any leads on hardware/bolt kits for this 50 deluxe? All I see are fine thread, I can blast and paint but then you have to repaint after tightening?

I think this front end has been replaced with dodge parts, what do the experts say. Everything else says and matches Plymouth but this grill with the round lights on the outside. Frame shows signs of repair from an accident before.

It's a sanden sd5, comes in the vintage air heritage series kit.

Yes I did, it fits the alternator in below it also