Need Throwout Bearing Specs

[billrigsby]

 

As I could not find any of the three, throwout bearing carriers, I know I HAD, with

the exception of the fluid drive one.

I ordered one from Vintage Power Wagons, but that creates an issue with the bearing

supplied by Tennessee Clutch.

The carrier pivot points line up perfectly with the fork, but the supplied bearing has 

over a half inch too small ID?

 

 

 

 

Any idea which part is incorrect?

Any one have specs for the bearing?

I think it is wrong.

 

[Dave72dt]

2 different ID's on the carriers?  Which one fits on the trans input shaft housing of the trans you plan on using?  BCA should have spec.

[billrigsby]

 

Yes the carrier I got from Vintage Power Wagons does fit the transmission,

so like I thought the bearing is incorrect.

I need one with a 2.054 ID

 

Not sure what BCA is?

[Dave72dt]

1505 brg has a 1.499 id and I think is for the fluid drive.  2065 has a 2.063 id. Check your finger dimension on the clutch.  Did you order a fluid drive clutch or standard clutch?

[Dave72dt]

BCA used to make most of the throw out brgs   The 2065 brg is fairly common and used on lots of manufacturer's trans.  Should be able to order on locally or may be stock.

[billrigsby]

 

Ordered for a standard clutch, and the bearing just barely contacts the fingers correctly.

 

I'll be down in Colorado Springs next Friday I'll stop at Whisler Bearing and get the proper bearing.

[billrigsby]

Yes it is very common, I can get it virtually anywhere there's an O'Reilly in Woodland Park locally

 

[billrigsby]

 

If anyone can use the BCA 1505 bearing

I posted it for free in the Classifieds, just pay shipping.