Conn47D24 Posted September 1, 2020 Report Posted September 1, 2020 These center trim / hinge bolts are listed in the parts book as the same part #. It appears that one has elongated bolt holes. Are these for adjustment purposes? If so, does that one mount in front, or back on the cowl? Or no difference as the book shows after all ?? Quote
Dan Hiebert Posted September 1, 2020 Report Posted September 1, 2020 (edited) On ours, the one with the oblong holes is on the rear/cowl. I am assuming this is because the rear of the hood being much wider than the front needs more wiggle-room to sit down in the opening correctly, and there is no trim piece on the cowl that the center trim/hinge piece needs to match up to . BUT, the holes in the other one are still large enough for plenty of adjustment to get the front matched up right, too. Edited September 1, 2020 by Dan Hiebert 2 Quote
Conn47D24 Posted September 1, 2020 Author Report Posted September 1, 2020 Excellent Dan Again , thank you for checking this. ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.