grubby65 Posted July 12, 2020 Report Posted July 12, 2020 I need to get into the headlight housing of my 1937 DeSoto and check the wiring at the bulb socket. Have power to the headlight but not at the socket. Have the lens removed, but struggling removing the reflector. Can someone go through the steps for removal? Nothing in the shop manual. Quote
sidevalvepete Posted July 12, 2020 Report Posted July 12, 2020 If they are the same as my 38 Dodge they should just pop out if levered gently. They are held to the interior adjustment ring by the three spring clips that you can see the head of in the edge of the reflector in your photo Quote
Pete Posted July 13, 2020 Report Posted July 13, 2020 I have this arrangement on my '38 Dodge pickup. I use a needle nose pliers to push the two flat parts of one of the spring clips together so they will fit through the small square hole. Pete Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.