jump starting a 6 volt positive ground car

[Adam H P15 D30]

17 hours ago, desoto1939 said:

Yes there is a reason.  My battery is a factory setup in which the battery box is under the fron seat on the driver side of the car.  So in order to connect directly to the battery I would have to lift out the seat then remove the top cover of the battery box and then connect the two leads.  Then when wanting to take the car out have to reverse the whole process.

 

The way that I have it working is I just remove the two alligator clips and I am good to start the car and go for a ride.  This unit has no issues with charging the battery in this setup.

 

Rich Hartung

desoto1939@aol.com

And the light bulb goes on, forgot about that little detail .  Thank you for the clarification...

[desoto1939]

1 hour ago, Adam H P15 D30 said:

And the light bulb goes on, forgot about that little detail .  Thank you for the clarification...

if the battery was in the engine compartment as the late 40's car then I would hook directly to the battery.  With the battery under the seat it is a real pain in the backside and also is harder to check the acid water level in the battery.

 

Rich