Spark Plug Advice

[BobB]

Hi -

 

I'm about to replace the plugs in my 318. From reading the forum, I chose Autolite 306s. The shoot manual says 0.035" gap with 26-32 ft lb installation torque.

 

So my question is what insights or tweaks to the book knowledge would you folks recommend based on experience?

 

I'm also considering putting the Ever-Dry hoods on the plug wires and would be interested in any advice you have to offer there as well.

 

Many thanks for your thoughts.

 

Bob

[Plymouthy Adams]

6 minutes ago, BobB said:

Hi -

 

I'm about to replace the plugs in my 318. From reading the forum, I chose Autolite 306s. The shoot manual says 0.035" gap with 26-32 ft lb installation torque.

 

So my question is what insights or tweaks to the book knowledge would you folks recommend based on experience?

 

I'm also considering putting the Ever-Dry hoods on the plug wires and would be interested in any advice you have to offer there as well.

 

Many thanks for your thoughts.

 

Bob

306 in a 318.....the tip willnot be deep enough.....

[BobB]

Oops, I meant to type 218. It is an original type motor, but from a Plymouth.

[Plymouthy Adams]

13 minutes ago, BobB said:

Oops, I meant to type 218. It is an original type motor, but from a Plymouth.

that will work..I also prefer the Autolite....