Electronic distributor

[Phil Martin]

I have searched all over for how to convert slant six electronic distributor to use in 230 flathead. Could someone please tell me how to find it?

[wayfarer]

Here ya go...

https://www.jalopyjournal.com/forum/threads/mopar-flathead-6-distributor-upgrade-48-desoto.653565/

[Phil Martin]

thanks a lot for your help. I knew I had seen it onetime but thought it was on this site

 

[Adam H P15 D30]

It is on this site also but the pictures fell victim to the photobucket scandal but the write up here is very good.  If you google it, the photos are still there.

There is another thread here right now with the link.

Adam

Edited November 1, 2017 by Adam H P15 D30

[55 Fargo]

I dont know why its not in the archive on this forum.

I have documented it and so has Thrashingcows.

Its not hard to undertake.

I have actually done it so not theorizing about it.

Its a good choice for the conversion.

Some add a GM hei module too or a new box for the mopar type.

[55 Fargo]

Some pics

[Adam H P15 D30]

5 hours ago, 55 Fargo Spitfire said:

I dont know why its not in the archive on this forum.

I have documented it and so has Thrashingcows.

Its not hard to undertake.

I have actually done it so not theorizing about it.

Its a good choice for the conversion.

Some add a GM hei module too or a new box for the mopar type.

In short the HEI module is the way to go  

Your conversion thread and Thrashingcows should be available in the archives. I used it when I did mine  

Adam

Edited November 2, 2017 by Adam H P15 D30

[55 Fargo]

1 minute ago, Adam H P15 D30 said:

I laid it out in the other distributor thread but in short the HEI module is the way to go but there is a little "electronics" involved to truly make it work correctly or reindex your distributor cap. 

Your conversion thread and Thrashingcows should be available in the archives. 

Adam

Yah checked thrashingcows and his photobucket pics are not showing.

I should have made some type of video tutorial, but in reality it's quite simple....