bergy Posted September 23, 2017 Report Posted September 23, 2017 Hey all I check oriellys they want 85 bucks each. for ty rod ends for 53 dodge b3 truck. Is there a cross over part number. for cheaper price. . Thanks to all Quote
NiftyFifty Posted September 23, 2017 Report Posted September 23, 2017 Tie rod ends are not something to cheap out on...try Rockauto, but I pretty much only recommend the Moog branded ones. 1 Quote
gramps1951 Posted September 24, 2017 Report Posted September 24, 2017 auto zone 19.99 each made in usa made by moog left side ES60L for left side fit my b3b check it out . Neil Quote
gramps1951 Posted September 24, 2017 Report Posted September 24, 2017 This part on the box says duralast part in box said MOOG. Hope that helps. Neil Quote
Pauls_Plymouth Posted September 24, 2017 Report Posted September 24, 2017 Several on eBay, i just got a left outer with fast delivery. top quality. Quote
bergy Posted September 28, 2017 Author Report Posted September 28, 2017 Drag Link Ends. Thanks for the help-Ok I got most of the stuff ordered for my 53 B3. from rock auto. I could not find the drag link ends- other than the ones listed for .power steering . Did not quite understand that part . So now I need to know - is that the same drag link with the same ends or not.?Wheres a good source for these ends.? Thanks in advance Quote
Merle Coggins Posted September 28, 2017 Report Posted September 28, 2017 Drag link ends are not replaceable. You must replace the drag link as a complete unit. Only the tie rod ends are replaceable. Quote
The Oil Soup Posted September 28, 2017 Report Posted September 28, 2017 I made a new drag link with replaceable tie rod ends, and now it is adjustable to center the steering wheel. Quote
Merle Coggins Posted September 28, 2017 Report Posted September 28, 2017 1 hour ago, The Oil Soup said: I made a new drag link with replaceable tie rod ends, and now it is adjustable to center the steering wheel. I've thought about doing that. Mine was centered good until I did the disc brake conversion. Now it's off a little. Quote
bergy Posted September 29, 2017 Author Report Posted September 29, 2017 To oil soup. How did you make new center link? Did you use old ty rod? What did you use the for the ends-same ty rod ends used for the ty rod? Help is always appreciated.thanks Bergy Quote
The Oil Soup Posted September 29, 2017 Report Posted September 29, 2017 I got hold of a Ford tie rod shortened it and threaded the right side and did use the same ends. I also mounted it from the underside of the steering arm because I have a Sid's 3" dropped axle and needed to clear the springs and get it parallel to the tie rod and reduce the chance of bump steer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.