39 dodge brake line connector block

[garyp]

The brake line connector block mounted on the frame just in front of the master cylinder where the front and rear brake lines and master cylinder join what is that called it also has a switch or something on top that I guessed was a stop lite switch but my books wiring diagram call it a signal lamp switch with 1 wire going to the ampmeter and the other going to the dimmer switch can someone please set me straight on this I am afraid to hook up the wires until I am sure.  Thanks in advance   Gary  

[Mike36]

Gary, that is your  brake light switch. It will have 2 wires. One is hot, the other goes to the brake light circuit of the tail lights.

[dpollo]

Mike 36 is absolutely correct, there is no  connection to the .dimmer switch

[garyp]

Thanks guys I thought so I wonder why the book says different. You guys had my back again if I can ever help you let me know.   Gary  

[Plymouthy Adams]

before turn signals were the rave.... this was your "signal" you were slowing/stopping