Bushings

[belvedere666]

If I were looking for bushings for these front end parts, what would I call them in a parts search?

any recommended sources?

[Andydodge]

I know them as Upper Outer and Lower Outer Bushes and Pins, I've also seen the Upper Outer Bush referred to as the Camber Adjusting Bush which it is......the upper bush uses a pair of rubber seals, one at either end, tho" a piece of radiator hose or very large O rings can be substituted........the lower bush is screwed into the spindle and I have seen TWO sizes of the hex head on this bush........the head side of the bush uses a circular rubber seal with an internal hex shaped hole that is a snug fit over the head of the bush which when installed into the spindle protrudes about 1/4" past the edge of the spindle and has a rubber seal with an internal hole to cover this protrusion.....anyway trust this helps................andyd     

[belvedere666]

I don't know if that helps... haha.

thats a lot of info.

ive looked for "upper/lower control arm bushings but I keep finding all kinds of things that don't look anything alike.

can you tell me if this eBay listing looks like the right parts???

http://m.ebay.com/itm/Energy-Suspension-Bushing-Kit-Polyurethane-Red-Dodge-Plymouth-Passenger-Car-Kit-/191416115696?hash=item2c914a21f0%3Ag%3AC8IAAOSw9N1VynKh&_trkparms=pageci%3Ab04272ce-a17c-11e6-ad5d-74dbd18091e9%7Cparentrq%3A286997f51580a7854eda0311fffa8336%7Ciid%3A1

 

[_shel_ny]

[casper50]

Link does not show correct parts.

http://www.oldmoparts.com/parts-front-axle.aspx

 

about a 1/3 of the way down

 

Edited November 3, 2016 by casper50

[_shel_ny]

2-10-2      1064677

2-8-3        1321130