Carburetor clamp on adaptor

[grady hawkins]

I replaced my   D24 B&B carb with a new Holley universal Daytona Parts carb.

Included in the shipment {not needed on my application) was a clamp adaptor which would clamp to the top of  a B&B carb but then the top of the adaptor would accept a straight flat sided bottom of a air filter.

See a picture at their web site  www.daytonaparts.com

[knuckleharley]

I replaced my   D24 B&B carb with a new Holley universal Daytona Parts carb.

Included in the shipment {not needed on my application) was a clamp adaptor which would clamp to the top of  a B&B carb but then the top of the adaptor would accept a straight flat sided bottom of a air filter.

See a picture at their web site  www.daytonaparts.com

 

Ok,so what do you want to do,tell us how good the carb is,or are you trying to sell the air cleaner adapter?

 

How much did the carb cost and did it come with the adapter?

 

BTW,am I the only one thinking that is a Holley 1904 Model like those used on all 6 cylinder Fords from 1952 to the mid-60's?

 

It was even used on come GM inline 6's,as well as Studebakers.

[grady hawkins]

I  only wanted to make any one aware that might want to mount a different air filter that did not need the original match for the MOPAE carb top.

As I indicated in my post. it came with the shipment. As indicated.the carb was a universal appplication

I have no interest in promoting the carb

Just a FYI!

[46Ply]

I checked the link, but I can't find any pictures of the clamp adapter.  Can you post a picture of it?

[grady hawkins]

 

 

 

 

Here is a photo of the clamp. Let me know if you got it.

[Don Coatney]

I made my own adapters out of a couple of chunks of aluminum.

 

 

[Dartgame]

I bought one of those adapters from champion carburetor in Arlington Texas. There are practically no air cleaners with a 2 3/8 inch base, they are usually 2.5 inches. I cut some pieces of tailpipe and made spacers to bush a 2.5" opening air cleaner to the adapter, one ring fits so snug to the adapter there was no need to mechanically fasten it. The other I JB welded to the air cleaner base, it fit sung as well, but wanted to insure it would not move around. I could have welded it, but the metal on the base is really thin, I figured gluing would be okay. Works fine..