Intake manifold gasket sealer?

[mopar_earl]

Hello,

I searched the forum and had no luck finding what for sealer you guys are using on the intake manifold gasket. Maybe no one is using a sealer? Being the intake, I'd hate to have vacuum leaks so I believe sealer should be used. Any advice?

Thanks,

Earl

[Plymouthy Adams]

you need no sealer on the  manifold other than a nice new clean gasket..if you are having sealing issues look the having the surface machined flat...

[_shel_ny]

And per manual installation instructions tighten the 4 bolts that secure intake to exhaust after the other 13 nuts/bolts to insure that both intake and exhaust are seated properly against the gaskets/block.

[mopar_earl]

And per manual installation instructions tighten the 4 bolts that secure intake to exhaust after the other 13 nuts/bolts to insure that both intake and exhaust are seated properly against the gaskets/block.

Thanks! I do have the service manual.

Earl

[mopar_earl]

you need no sealer on the manifold other than a nice new clean gasket..if you are having sealing issues look the having the surface machined flat...

Thanks for the advice!

Earl