Don Colliau Posted June 22, 2015 Report Posted June 22, 2015 Can anybody give me a picture of this? I din't think I have an original. Thanks, Don Quote
Plymouthy Adams Posted June 22, 2015 Report Posted June 22, 2015 can you show a picture of yours? Quote
Jdrew Posted June 22, 2015 Report Posted June 22, 2015 Best pic i have if mine. Car is currently at the fab shop...no other pics at the moment. Quote
Don Colliau Posted June 23, 2015 Author Report Posted June 23, 2015 Thanks. I have one but it dosen't look like that. Ill probably have to make one of those too if I want to leave it in the stock location. Quote
Plymouthy Adams Posted June 23, 2015 Report Posted June 23, 2015 again, put a pic of yours up here..it may get identified for you to later offer in trade or for sale Quote
suntennis Posted June 23, 2015 Report Posted June 23, 2015 The fill tube for the 49 thru 52 Suburban is the same and different than non Suburban models because the gas tank is different. These are of a 52 Suburban gas fill tube. Quote
Plymouthy Adams Posted June 23, 2015 Report Posted June 23, 2015 yes...I have a 51 Suburban here with stock fill tube....I just was trying to get Don to post a pic so to help identify what he has... Quote
Don Colliau Posted June 24, 2015 Author Report Posted June 24, 2015 The one I have is not even a Plymouth part. I suspected that from the beginning. There is a flange at the top of it that is the same size as the hole in the fender sith three screw holes in it. I will build what I need. Quote
Plymouthy Adams Posted June 25, 2015 Report Posted June 25, 2015 what you may very well have gotten was the intended new input tube for a flush mount upgrade with hinged door... Quote
Don Colliau Posted June 27, 2015 Author Report Posted June 27, 2015 what you may very well have gotten was the intended new input tube for a flush mount upgrade with hinged door... I already threw that piece of junk out. Quote
Plymouthy Adams Posted June 27, 2015 Report Posted June 27, 2015 maybe you should throw out the tube you have...lol Quote
Don Colliau Posted June 28, 2015 Author Report Posted June 28, 2015 The other question I need an answer to is what diameter is the original tube where it goes thru the fender. I can get a end I just need to get the right size to fit a new original grommet. Thanks, Don Quote
Plymouthy Adams Posted July 2, 2015 Report Posted July 2, 2015 (edited) that may depend on the very filler tube grommet you have on hand..is it right for the car or was it purchased to go with the unit you are now not using...measure the hole that is on the fender if not already modified for a flush mount door and or use the very grommet that you have on hand and if you are intending to go stock you will need this grommet as it is anyway..get one from a few of the readily available suppliers mentioned here on the forum...go from there....this also depends on the very tank you using..are you stock...measure the input neck.. 2 1/4 is norm pipe diameter and the body hole is 3 inches... Edited July 2, 2015 by Plymouthy Adams Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.